User Guide: Model A042A Connector Gage Kit (SMP/GPO Connectors)

ABSTRACT: This is the user guide for the Maury Microwave model A042A Connector Gage Kits (SMP/GPO connectors). The Maury model A042A connector gage kit is designed to measure the interface dimensions of SMP/GPO connectors. The female interface requires two measurements: the center contact, and dielectric location. The male interface requires only one measurement: the contact pin location. In addition, your A042A gage kit is equipped with a set of test pins used to distinguish between the four commonly used male connectors (full detent, limited detent, smooth bore, and catchers mitt). These four designations refer to the four types of outer conductor mating configurations used on the SMP male connectors. Holes are provided in the test pin handles to hold jack to jack adapters for ease of gaging.