ABSTRACT: This discussion covers the following Boonton Electronics models: All peak and CW RF Power Sensors and all RF Voltage Probes. All current Boonton power sensors and voltage probes contain…
ABSTRACT: The ACE9600 device can be controlled remotely using its LAN interface. The instrument can be connected to any IEEE-802 network. It uses TCP/IP, and achieves transfer rates up to…
ABSTRACT: The Holzworth family of frequency synthesizers offers a breadth of products to address a wide range of test applications including component characterization as well as local oscillator (LO) and…
ABSTRACT: This is the downloadable PDF of the RTP Series API Programming Reference.
…
ABSTRACT: This is the online html of the RTP Series API Programming Reference.
…
ABSTRACT: The user manual provides the information needed to install, operate, and maintain the Boonton RTP5000 Real-Time Peak Power Sensors and RTP4000 Real-Time True Average Power Sensors. The 55 Series…
ABSTRACT: This document covers the Boonton RTP-Series and 55-Series USB Power Sensor security procedures.
…
ABSTRACT: SATGEN II is a graphical user interface (GUI)-based program used to generate data files necessary for the Dynamic Mode of dBm’s Satellite Link Emulator (SLE). The program calculates Doppler,…
ABSTRACT: This instruction manual provides you with the information you need to install, operate, and maintain Boonton SGX1000 Series RF Signal Generators.
…
ABSTRACT: The SGX1000 LAN interface is configured using the System > I/O Config > LAN menu. The instrument may be set to automatically accept its IP address and associated information…
ABSTRACT: The STK® user interface (UI) Plugin is a COM component loaded at run-time. The UI Plugin stays active for as long as the STK® Desktop Application is running. The…
ABSTRACT: Select the USB sensor that is right for you, by frequency, power level, measurement type, and video bandwidth.
…