ABSTRACT: This Quick Start Guide supports the Nano5G NT 18 GHz Series Tuners used for high‑frequency impedance tuning and mismatch-control applications. These tuners incorporate precision electromechanical actuation with 1.85 mm connectors and are designed for use in 5G and broadband RF characterization environments.
The Nano5G NT tuners interface through Telnet or Maury software platforms including MTUNE, ATS, and IVCAD, providing full control for tuning and characterization workflows. This guide covers unpacking, handling, connector locations, locking‑screw procedures, and initial setup steps using USB or Ethernet, ensuring safe preparation and operation of the tuner and controller.