ABSTRACT: Multi-channel synthesis applications require specific performance parameters that are often overlooked with the design of single channel synthesizer systems. Performance specifications for multi-channel synthesis applications typically require channel to…
ABSTRACT: This instruction manual provides you with the information you need to install, operate, and maintain the PMX40 RF Power Meter.
…
ABSTRACT: The PMX40 LAN interface is configured using the System > I/O Config > LAN menu. The instrument may be set to automatically accept its IP address and associated information…
ABSTRACT: With the ever increasing demand for higher data rates and lower power consumption, power and signal integrity are playing a larger role in the design of modern electronic devices.…
ABSTRACT: (Broadcasted on 5/25/2011) Pulsed signals used for radar, remote sensing and tracking, MRI medical imaging, and certain wireless communication applications such as WiMax & LTE have become increasingly complex to…
ABSTRACT: The overall performance of a power meter is dependent upon the sensor employed. Boonton Electronics (Boonton) has addressed this by providing quality power sensors to meet virtually all applications.…
ABSTRACT: This discussion covers the following Boonton Electronics models: All peak and CW RF Power Sensors and all RF Voltage Probes. All current Boonton power sensors and voltage probes contain…
ABSTRACT: WAMICON Presentation - Precision Timing Measurements in 5G TDD Networks
…
ABSTRACT: Watch the on-demand “Principles of RF and Microwave Power Measurement” webinar from Boonton to learn all about power measurement fundamentals, which are critical for designers and technicians to reach the…
ABSTRACT: With today’s complex modulation schemes and pulsed communication modes, engineers must measure RF power accurately and efficiently to ensure components and systems operate at their highest level of performance.…
ABSTRACT: The ACE9600 device can be controlled remotely using its LAN interface. The instrument can be connected to any IEEE-802 network. It uses TCP/IP, and achieves transfer rates up to…
ABSTRACT: In many applications, like wireless communication and radar, pulsed (or bursted) RF signals are utilized. Not only is the level of RF power important, but the shape (RF power…