System Accessory
Noise Conditioning Module
Noise occurs naturally in any active device or circuit limiting the minimum levels of useful signals causing unwanted interference on weaker signals. Therefore, it is important to design circuits to minimize the effects of noise by quantifying them in the form of noise parameters. The MT7553 series enhances the typical noise system measurement accuracy reducing the total system noise figure by adding an integrated switch and wideband LNA close to the DUT. The Noise Switching Module integrates the entire input network while the Noise Receiver Module integrates the entire output network of a typical noise parameter measurement system into a turnkey solution.
Maury Microwave
Features and Benefits
- Instantaneous Ultra-Wideband Measurements from 100 MHz – 65 GHz
- Banded Measurements from 50–75 GHz
- Automates Noise Parameter Measurement Systems
- Integrated Downconverter, Bias Tees, Low-Noise Amplifier, and Switches
- Low Noise Figure for Improved System Calibration Accuracy and Repeatability
- Integrated LNA reduces second-stage noise figure by 5-6dB
Key Specifications
- Frequency Range 0.1 GHz to 110 GHz
- Noise Figure (dB, Typical) 6 to 12 dB
- NFA output frequency 0.1 GHz to 50 GHz
Resources
Catalog
Data Sheet
Application Note
Application Notes
Need More Information?
Complete the form below and we will contact you as soon as possible!
Related Products
Hardware
Software
Services
Support
Models Table
| Name | Description | Frequency Range (GHz) | Connector 1 | Gender 1 | Connector 2 | Gender 2 | NFA Output Frequency (GHz) | Noise Figure (Typical, dB) | Noise Figure (Maximum, dB) | LO | Mixer | LNA | Bias Tee | Switch (VNA/NFA) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MT7553A03 | Output NRM |
0.1-26.5 |
3.5mm |
Female |
3.5mm |
Female |
0.1-26.5 |
6 |
8 |
NA |
NA |
Internal |
Internal |
Internal |
| MT7553B03 | Output NRM |
0.1-50 |
2.4mm |
Female |
2.4mm |
Female |
0.1-50 |
10 |
16 |
NA |
NA |
Internal |
Internal |
Internal |
| MT7553C01 | Output NRM |
0.1-65 |
1.85mm |
Female |
1.85mm |
Female |
0.1-50 |
10 |
18 |
External |
Internal |
Internal |
Internal |
Internal |
| MT7553M10 | Output NRM |
75-110 |
WR10 |
– |
WR10 |
– |
0.1-26.5 |
12 |
– |
External |
Internal |
Internal |
External |
External |
| MT7553M12 | Output NRM |
60-90 |
WR12 |
– |
WR12 |
– |
0.1-26.5 |
12 |
– |
External |
Internal |
Internal |
External |
External |
| MT7553M15 | Output NRM |
50-75 |
WR15 |
– |
WR15 |
– |
0.1-26.5 |
12 |
– |
External |
Internal |
Internal |
External |
External |
| MT7553N26 | Input NSM |
0.1-26.5 |
3.5mm |
Female |
3.5mm |
Female |
– |
– |
– |
– |
– |
– |
– |
– |
| MT7553N50 | Input NSM |
0.1-50 |
2.4mm |
Female |
2.4mm |
Female |
– |
– |
– |
– |
– |
– |
– |
– |
| MT7553N65 | Input NSM |
0.1-65 |
1.85mm |
Female |
1.85mm |
Female |
– |
– |
– |
– |
– |
– |
– |
– |