ABSTRACT: Secondary surveillance radar (SSR) has been around since World War II, based on the military’s “identification friend or foe” radar system. While the radar systems have evolved, many of…
ABSTRACT: Secondary Surveillance Radar and IFFEL are important tools for aviation security. While radar systems have undergone a long period of development, many testing challenges remain. Designing, characterizing, installing or maintaining…
AUTHORS: Maury Microwave, Vertigo Technologies and Virginia Diodes
PUBLICATION HISTORY: Microwave Journal – March 2024
ABSTRACT: The authors introduce the concept of active load pull, discuss the challenges related…
AUTHORS: John F. Sevic – Spectrian Corporation, Sunnyvale, California
PUBLICATION HISTORY: First published in the Microwave Journal, March 1999, Vol. 43, No. 3 and republished with permission in this format…
ABSTRACT: The Data-Over-Cable Service Radio Frequency Interface Specifications call out BER performance vs. Es/No as required tests for both the Upstream CMTS (Cable Modem Termination System) and Downstream CM (Cable…
AUTHORS: Steve Dudkiewicz, Maury Microwave Corporation and Mauro Marchetti, Anteverta-mw
PUBLICATION HISTORY: Nov 2011
ABSTRACT: The MT2000 mixed-signal active load pull system breaks the 500W barrier with the successful…
ABSTRACT: Injecting Additive White Gaussian Noise (Gaussian Noise) of varying power from Noisecom noise generators into the cable network is an effective way to assess the extent of cable network’s…
ABSTRACT: This Holzworth authored article for Microwave Journal helps removes the mystery from additive phase noise measurements. The article can be downloaded here or can be viewed directly at Microwave Journal.…
Phase noise measurements fall under two categories: absolute and residual (additive). Where absolute phase noise measurements are typical of oscillators and and other frequency sources, residual phase noise measurements are…
ABSTRACT: This manual contains operation instructions and reference information for the dBm ACE9600. The ACE9600 reproduces link effects found in communications between earth stations and satellites.
This manual is prepared…
ABSTRACT: Boonton's Amplifier Test BenchTM software is designed for efficient and accurate test, verification and analysis of filters and RF amplifiers, including linear, telecommunication and high power amplifiers. The software is…
ABSTRACT: This paper describes a method for obtaining and using probability functions to analyze the peak power of complex modulated RF signals.
…