ABSTRACT: This discussion covers the following Boonton Electronics models: 4241 and 4242 RF Power Meters and 9241 and 9242 RF Voltmeters.
…
ABSTRACT: This manual contains operation instructions and reference information for the dBm ACE9600. The ACE9600 reproduces link effects found in communications between earth stations and satellites.
This manual is prepared…
ABSTRACT: Select the USB sensor that is right for you, by frequency, power level, measurement type, and video bandwidth.
…
ABSTRACT: This document describes the setup and usage of the CPS2000-Series True-Average Connected Power Sensors, CPS2000 GUI application software, Boonton CPS2000 IVI.NET driver software, and Boonton CPS2000 IVI-C driver software.…
ABSTRACT: This document is intended to serve as a specification and reference for the instrument commands supported by the CPS2000 Series True-Average Connected Power Sensors. It is not intended to…
ABSTRACT: The following is a guide to connect and control any of the HSM Series modules.
…
ABSTRACT: This is the operating instructions for the Maury Microwave model A007A Connector Gage Kit (Type ‘N’ Connectors). The model A007 A Connector Gage Kit is designed to measure and…
ABSTRACT: This is the operating instructions for the Maury Microwave Model A012A (TNC/BNC Connectors). The Maury model A012A connector gage kit is designed to measure the contact pin and dielectric…
ABSTRACT: This is the operating instructions for the Maury Microwave model A012G Connector Gage Kit (TNC/TNCA/BNC Connectors). The Maury model A012G connector gage kit is designed to measure the contact…
ABSTRACT: This is the operating instructions for the Maury Microwave model A020A Connector Gage Kit (Type 'N' connectors). The model A020A Connector Gage Kit is designed to measure and check…
ABSTRACT: This is the operating instructions for the Maury Microwave model A020D Connector Gage Kit (Type 'N' connectors, metrology grade). The Maury model A020D connector gage kit is designed to…
ABSTRACT: This is the operating instructions for the Maury Microwave model A020G Connector Gage Kit (75 Ohms Type 'N' connectors). The Model A020G Connector Gage Kit is the same as…
ABSTRACT: This is the user guide for the Maury Microwave model A027 Connector Gage Kit (SMA connectors). The Maury model A027, A027 A, A027G and A027M connector gage kits are…
ABSTRACT: This is the user guide for the Maury Microwave model A027A1 Connector Gage Kit (SMA connectors). Maury model A027P1, A027A1, A027G1 and A027M1 connector gage kits are designed to…
ABSTRACT: This is the operating instructions for the Maury Microwave model A028D Connector Gage Kits (7mm, metrology grade). The Maury model A028D connector gage kit features a "thread-on" design which…
ABSTRACT: This is the operating instructions for the Maury Microwave model A028D Connector Gage Kits (7mm, metrology grade). The Maury model A028D connector gage kit features a "thread-on" design which…
ABSTRACT: This is the operating instructions for the Maury Microwave model A028F Connector Gage Kits (7mm digital, metrology grade). The Maury model A028F connector gage kit is designed to measure…
ABSTRACT: This is the operating instructions for the Maury Microwave model A034B Connector Gage Kits (3.5mm and 2.92mm connectors). The Maury model AO34B connector gage kit is designed to measure…
ABSTRACT: This is the operating instructions for the Maury Microwave model A034B1 Connector Gage Kits (3.5mm and 2.92mm connectors). The Maury model A034B1 connector gage kit is designed to measure…
ABSTRACT: This instruction manual provides you with the information you need to install, operate, and maintain the PMX40 RF Power Meter.
…
ABSTRACT: The PMX40 LAN interface is configured using the System > I/O Config > LAN menu. The instrument may be set to automatically accept its IP address and associated information…
ABSTRACT: The overall performance of a power meter is dependent upon the sensor employed. Boonton Electronics (Boonton) has addressed this by providing quality power sensors to meet virtually all applications.…
ABSTRACT: This discussion covers the following Boonton Electronics models: All peak and CW RF Power Sensors and all RF Voltage Probes. All current Boonton power sensors and voltage probes contain…
ABSTRACT: The ACE9600 device can be controlled remotely using its LAN interface. The instrument can be connected to any IEEE-802 network. It uses TCP/IP, and achieves transfer rates up to…
ABSTRACT: The Holzworth family of frequency synthesizers offers a breadth of products to address a wide range of test applications including component characterization as well as local oscillator (LO) and…
ABSTRACT: This is the downloadable PDF of the RTP Series API Programming Reference.
…
ABSTRACT: This is the online html of the RTP Series API Programming Reference.
…
ABSTRACT: The user manual provides the information needed to install, operate, and maintain the Boonton RTP5000 Real-Time Peak Power Sensors and RTP4000 Real-Time True Average Power Sensors. The 55 Series…
ABSTRACT: This document covers the Boonton RTP-Series and 55-Series USB Power Sensor security procedures.
…
ABSTRACT: SATGEN II is a graphical user interface (GUI)-based program used to generate data files necessary for the Dynamic Mode of dBm’s Satellite Link Emulator (SLE). The program calculates Doppler,…
ABSTRACT: This instruction manual provides you with the information you need to install, operate, and maintain Boonton SGX1000 Series RF Signal Generators.
…
ABSTRACT: The SGX1000 LAN interface is configured using the System > I/O Config > LAN menu. The instrument may be set to automatically accept its IP address and associated information…
ABSTRACT: The STK® user interface (UI) Plugin is a COM component loaded at run-time. The UI Plugin stays active for as long as the STK® Desktop Application is running. The…
ABSTRACT: Select the USB sensor that is right for you, by frequency, power level, measurement type, and video bandwidth.
…
ABSTRACT: This is the user guide of the Maury Microwave 1.85mm Coaxial Calibration Kit for models 7850CK30/31. This series of 1.85mm the DC to 67.0 GHz coaxial calibration kits is…
ABSTRACT: This is the user guide of the Maury Microwave 2.4mm Coaxial Calibration Kit for models 7950CK10/11 7950CK20/21. This series of 2.4mm the DC to 50.0 GHz coaxial calibration kits…
ABSTRACT: This is the user guide of the Maury Microwave 2.4mm Coaxial Calibration Kit for models-7950CK30-31. This series of 2.4mm the DC to 50.0 GHz coaxial calibration kits is designed…
ABSTRACT: This is the user guide of the Maury Microwave 2.92mm Coaxial Calibration Kit for models 8770CK10/11 and 8770CK20/21. This series of 2.92mm the DC to 40.0 GHz coaxial calibration…
ABSTRACT: This is the user guide of the Maury Microwave 2.92mm Coaxial Calibration Kit for models 8770CK30/31. This series of 2.92mm the DC to 40.0 GHz coaxial calibration kits is…
ABSTRACT: This is the user guide of the Maury Microwave 3.5mm Coaxial Calibration Kit from DC to 26.5 GHz for models 8050CK10/11 and 8050CK20/21. This series of 3.5mm coaxial calibration…
ABSTRACT: This is the user guide of the Maury Microwave 3.5mm Coaxial Calibration Kit from DC to 34 GHz for models 8050CK30/31. This series of 3.5mm the DC to 34.0…
ABSTRACT: This is the user guide of the Maury Microwave 7mm Coaxial Calibration Kit for model 2650CK30. This series of 7mm DC to 18.0 GHz coaxial calibration kits is designed…
ABSTRACT: This is the user guide of the Maury Microwave 7mm Coaxial Calibration Kit for models 2650CK10 and 2650CK20. This series of 7mm DC to 18.0 GHz coaxial calibration kits…
ABSTRACT: This is the user guide of the Maury Microwave AFTNC Coaxial Calibration Kit for models 8680CK10/11 and 8680CK20/21. This series of AFTNC the DC to 20.0 GHz coaxial calibration…
ABSTRACT: This is the user guide of the Maury Microwave BNC (50 Ohm) Coaxial Calibration Kit for model 8550CK10. This series of BNC 50 ohm coaxial calibration kits is designed…
ABSTRACT: This is the user guide of the Maury Microwave BNC (75 Ohm) Coaxial Calibration Kit for model 8580CK10. The 8580CK10 series of BNC 75 ohm coaxial calibration kits is…
ABSTRACT: This is the user guide of the Maury Microwave Coaxial Calibration Kit. This series of coaxial calibration kits are designed to provide accurate calibrations of network analyzers in the…
ABSTRACT: This is the user guide for the Maury Microwave model A020K Connector Gage Kit (type ‘N’ digital, metrology grade). The Maury model A020K connector gage kit is designed to…
ABSTRACT: This is the user guide for the Maury Microwave model A027P10, A10, G10, M10 Connector Gage Kits (SMA connectors). Maury model A027P10, A027A10, A027G10 and A027M10 connector gage kits…
ABSTRACT: This is the operating instructions for the Maury Microwave model A034E Connector Gage Kits (3.5mm and 2.92mm connectors, metrology grade). The Maury model A034E connector gage kit is designed…